Call of Duty 4: Modern Warfare
algun comando o configuracion para aumentar fps ? porfavor ayuda
Tengo una tarjeta de video nvidia 6200 de 256 gb
un procesador celeron D346 a 3.06 Ghz
y 1256 de RAM
y el call of duty 4 me corre a 20 fps y aveces a 30
si alguien sabe como puedo aumentar mis fps de forma notoria porfavor que me ayude
mi tarjeta de video ya tiene desactivado la sincronizacion vertical
Espero que me puedan ayudar
Adios saludos
26 Oct 2008, 05:45
cambia de grafica 
y sino mira de poner los graficos ‘‘bajos’’,
sino siempre puedes ponerte alguna cfg que aveces suben los fps
La tarjeta minima que pide es la 6600. Buff, co esa tarjeta chunga que te suban los fps, tal vez alguna config, pero aun asi, casi no vas a notar la diferencia.
yo la tenia al principio, i con config i todo al minimo no pasaba de 80 en interiores
solucion: comprate una nueva, diria que una ati4670 si no te quieres gastar mucho (80 €)
la verdad es que como alguien se tiene que llevar esos suculentos 5gm te ofrezco esto para ver si me los llevo:
Asi veo yo el cod4, no te quejes.
Si te da palo ponerte/descargarte una config, ponte estos comandos:
/cg_brass 0
/cg_blood 0
/r_drawdecals 0
/r_picmip 3
/r_polygonOffsetBias -4
/r_polygonOffsetscale -4
Baja todos los gráficos al mínimo, quita sincronización de las imágenes, aintiasling, muñeco, profundidad de campo.
Luego ver las fps pon /cg_drawfps 1
Por último limita las fps hasta donde te lleguenl, por ejemplo si te lleguen, aunque creo que lo minimo eran 35fps… si es cierto, ponte /com_maxfps 125
Por último para ver las fps pon /cg_drawfps 1
Saludos
Comentario #6 por saturos:
la verdad es que como alguien se tiene que llevar esos suculentos 5gm te ofrezco esto para ver si me los llevo:
Asi veo yo el cod4, no te quejes.
eres listo
PD: si soy yo
seta r_aaalpha “0” //anti-aliasing transparency method (0=off 1=fast Dither 2=SuperSample)
seta r_aasamples “1” //antialiasing 1 to 16 (1=Off 16=Maximun)
seta r_altmodellightingupdate “0” //Alternate lighting method (0=Alternate 1=Normal) needs restart
seta r_autopriority “1”//When the game is minimized, change to low priority (1=lowpriority 0=no)
seta r_cachemodellighting “1”//Cache for models lighting (0=none 1=Speedup)
seta r_cachesmodellighting “1”//Cache for statics models lighting (0=none 1=Speedup)
seta r_depthprepass “1”//Currently unknown (0=Default 1=Speedup)
seta r_depthprepassmodels “1”//Currently unknown (0=Default 1=Speedup)
seta r_detail “0”//Detailed Shaders(0=none 1=Activated)
seta r_displayRefresh “100 Hz”//Monitor Refresh (typically: 60 Hz, 75 Hz, 100 Hz)
seta r_distortion “0”//Fire HeatHAze distortion (0=none 1=Activated)
seta r_dlightlimit “0”//Number of dynamic lights (0 to 4)
seta r_dof_enable “0”//Depth of Field (0=none 1=activated)
seta r_drawdecals “0”//Enable World decals render (0=none 1=activated)
seta r_drawsun “0”//Sun effects(0=none 1=activated)
seta r_drawwater “0”//Water animation(0=none 1=activated)
seta r_envmapexponent “0.05”//Reflection exponent (0.05 to 20)
seta r_envmapmaxintensity “0.01”//Reflection intensity based on glancing angle (0.01 to 2)
seta r_envmapminintensity “0”//Reflection intensity based on glancing angle (0 to 2)
seta r_envmapoverride “0”//Reflection intensity based on glancing angle (0=none 1=Override)
seta r_envmapspecular “0”//Environment Map specular lighting (0=none 1=activated)
seta r_envmapsunintensity “0”//Max sun specular on env materials (0=none to 4=full)
seta r_fastskin “1”//Cache Skin (0=none 1=activated)
seta r_floatz “1”//Floatz, DOF, Laser Sight effects, do not disable (0=none 1=activated).
seta r_glow_allowed “0”//Must be activated for Glow (0=none 1=allow glow)
seta r_gpusync “0”//Improves mouse response, but gives FPS hit (0=none 1=adaptive 2=agressive)
seta r_lodbiasrigid “0”//Level of detail for static objects (-1000=better to 0=lowest)
seta r_lodbiasskinned “0”//Level of detail for skinned objects (-1000=better to 0=lowest)
seta r_lodscalerigid “4”//Level of detail for static objects (1=best to 4=worst)
seta r_lodscaleskinned “4”//Level of detail for skinned objects (1=best to 4=worst)
seta r_normal “1”//Allow Shaders to use normal maps (0=none 1=Activated)
seta r_mode “800x600”//Graphics Resolution
seta r_multiGPU “0”//Activate for use SLI or CrossFire (0=single GPU 1=two or more GPUs)
seta r_outdoor “1”//Prevents particles from appearing indoors (0=they appear 1=Default, none)
seta r_outdoorfeather “0”//Z-feathering for Outdoors, smothed grass, Smoke (0 to infinite)
seta r_picmip “3”//Texture Quality (0=Extra to 3=Low) - some servers require 2 or lower.
seta r_picmip_bump “3”//Bump Maps Quality, for relief textures (0=Extra to 3=Low)
seta r_picmip_spec “3”//Specular Map Quality, for lights (0=Extra to 3=Low)
seta r_picmip_water “0”//Water Quality (0=None 1=Normal)
seta r_picmip_manual “1”//Set to Manual the texture selection (0=Automatic 1=Manual)
seta 
endererinuse “0”//0=Shader 2.0 // 1=Shader 3.0 // 2=Default
seta esamplescene “1”//Sharpen filter and color correction applied(0=none 1=enabled)
seta r_sun_from “0”//Set sun flares from dvars (0=none 1=activated, this may be a cheat)
seta r_textfilteranisomax “16”//Max Anisotropic max filtering(1=none 16=full anisotropic)
seta r_textfilteranisomin “1”//Min Anisotropic filtering (1=none 16=full anisotropic)
seta r_textfiltermipmode “3”//0=normal 1=Trilinear 2=Bilinear 3=Disable Mipmap
seta r_uselayeredmaterials “0”//0=none 1=Enable on Shader 3.0 videocard
seta r_vsync “0”// Enable Vsync (0=none 1=activated)
hola a todos mira yo tengo esta pc y es bastante viejita :
micro intel p4 2.4 socket 478
una 6200 de 256mb
y una fuente de 250w q es re trucha
y a pesar q tengo esa pc el call of duty 4 me anda a 40/50 fps
lo tengo en resolusion de 800x600 , las texturas en extra y todo las opciones en on y en normal menos las sombras y me anda muy fluido
Comentario #10 por emax09:
hola a todos mira yo tengo esta pc y es bastante viejita :
micro intel p4 2.4 socket 478
una 6200 de 256mb
y una fuente de 250w q es re trucha
y a pesar q tengo esa pc el call of duty 4 me anda a 40/50 fps
lo tengo en resolusion de 800x600 , las texturas en extra y todo las opciones en on y en normal menos las sombras y me anda muy fluido
alomejor
PD: no
seta r_aaalpha “0” //anti-aliasing transparency method (0=off 1=fast Dither 2=SuperSample)
endererinuse “0”//0=Shader 2.0 // 1=Shader 3.0 // 2=Default 
esamplescene “1”//Sharpen filter and color correction applied(0=none 1=enabled)
seta r_aasamples “1” //antialiasing 1 to 16 (1=Off 16=Maximun)
seta r_altmodellightingupdate “0” //Alternate lighting method (0=Alternate 1=Normal) needs restart
seta r_autopriority “1”//When the game is minimized, change to low priority (1=lowpriority 0=no)
seta r_cachemodellighting “1”//Cache for models lighting (0=none 1=Speedup)
seta r_cachesmodellighting “1”//Cache for statics models lighting (0=none 1=Speedup)
seta r_depthprepass “1”//Currently unknown (0=Default 1=Speedup)
seta r_depthprepassmodels “1”//Currently unknown (0=Default 1=Speedup)
seta r_detail “0”//Detailed Shaders(0=none 1=Activated)
seta r_displayRefresh “100 Hz”//Monitor Refresh (typically: 60 Hz, 75 Hz, 100 Hz)
seta r_distortion “0”//Fire HeatHAze distortion (0=none 1=Activated)
seta r_dlightlimit “0”//Number of dynamic lights (0 to 4)
seta r_dof_enable “0”//Depth of Field (0=none 1=activated)
seta r_drawdecals “0”//Enable World decals render (0=none 1=activated)
seta r_drawsun “0”//Sun effects(0=none 1=activated)
seta r_drawwater “0”//Water animation(0=none 1=activated)
seta r_envmapexponent “0.05”//Reflection exponent (0.05 to 20)
seta r_envmapmaxintensity “0.01”//Reflection intensity based on glancing angle (0.01 to 2)
seta r_envmapminintensity “0”//Reflection intensity based on glancing angle (0 to 2)
seta r_envmapoverride “0”//Reflection intensity based on glancing angle (0=none 1=Override)
seta r_envmapspecular “0”//Environment Map specular lighting (0=none 1=activated)
seta r_envmapsunintensity “0”//Max sun specular on env materials (0=none to 4=full)
seta r_fastskin “1”//Cache Skin (0=none 1=activated)
seta r_floatz “1”//Floatz, DOF, Laser Sight effects, do not disable (0=none 1=activated).
seta r_glow_allowed “0”//Must be activated for Glow (0=none 1=allow glow)
seta r_gpusync “0”//Improves mouse response, but gives FPS hit (0=none 1=adaptive 2=agressive)
seta r_lodbiasrigid “0”//Level of detail for static objects (-1000=better to 0=lowest)
seta r_lodbiasskinned “0”//Level of detail for skinned objects (-1000=better to 0=lowest)
seta r_lodscalerigid “4”//Level of detail for static objects (1=best to 4=worst)
seta r_lodscaleskinned “4”//Level of detail for skinned objects (1=best to 4=worst)
seta r_normal “1”//Allow Shaders to use normal maps (0=none 1=Activated)
seta r_mode “800x600”//Graphics Resolution
seta r_multiGPU “0”//Activate for use SLI or CrossFire (0=single GPU 1=two or more GPUs)
seta r_outdoor “1”//Prevents particles from appearing indoors (0=they appear 1=Default, none)
seta r_outdoorfeather “0”//Z-feathering for Outdoors, smothed grass, Smoke (0 to infinite)
seta r_picmip “3”//Texture Quality (0=Extra to 3=Low) - some servers require 2 or lower.
seta r_picmip_bump “3”//Bump Maps Quality, for relief textures (0=Extra to 3=Low)
seta r_picmip_spec “3”//Specular Map Quality, for lights (0=Extra to 3=Low)
seta r_picmip_water “0”//Water Quality (0=None 1=Normal)
seta r_picmip_manual “1”//Set to Manual the texture selection (0=Automatic 1=Manual)
seta
seta
seta r_sun_from “0”//Set sun flares from dvars (0=none 1=activated, this may be a cheat)
seta r_textfilteranisomax “16”//Max Anisotropic max filtering(1=none 16=full anisotropic)
seta r_textfilteranisomin “1”//Min Anisotropic filtering (1=none 16=full anisotropic)
seta r_textfiltermipmode “3”//0=normal 1=Trilinear 2=Bilinear 3=Disable Mipmap
seta r_uselayeredmaterials “0”//0=none 1=Enable on Shader 3.0 videocard
seta r_vsync “0”// Enable Vsync (0=none 1=activated)